离子液体-有机溶剂复合技术处理含油污泥的研究

采用离子液体辅助溶剂萃取法处理胜利油田的含油污泥，回收原油，考察了不同溶剂、剂油比、温度、反应时间、离心机转速等条件对油和沥青质脱附效率的影响。结果表明：最佳的实验条件为在正庚烷+离子液体[Emim][BF4]溶剂体系中，剂油比50/3，温度50 ℃，反应时间20 min，离心机转速2 000 r/min；在此条件下，含油污泥中油的回收率高达90.5%，沥青质的回收率为83.1%；正庚烷和离子液体可以回收重复使用，正庚烷的一次和二次回收率分别为89.2%和74.2%；离子液体几乎没有损失，一次和二次回收率分别高达98.6%和95.4%；使用二次回收的正庚烷和离子液体为溶剂时油和沥青质的回收率分别达到85.1%和78.4%。在此基础上，探讨了含油污泥脱附过程的作用机理。离子液体-有机溶剂复合技术显著提高了油泥萃取的油回收率，对油泥的无害化和资源化工业生产具有重要的参考价值。     

Effects of the drying method on the oxidative stability of the free and encapsulated fractions of microencapsulated sunflower oil

The influence of the drying method, freeze-drying and spray-drying, on the oxidative stability of microencapsulated sunflower oil depended on the type of encapsulation matrix. For a dairy-type matrix, formed by sodium caseinate and lactose, greater losses of tocopherols were detected during spray-drying, but both the free and encapsulated oil fractions were more stable against lipid oxidation than their freeze-dried counterparts. Results suggested that the free oil was also constituted by droplets that preserved their interfacial membrane and were protected by the matrix. Therefore, the free oil was not necessarily the non-encapsulated fraction. For a matrix constituted by gelatine, maltodextrin and sucrose, the emulsion showed low stability and a great destabilisation during spray-drying. No significant effect of the drying method on the oxidative stability of the encapsulated fraction was found with this matrix, but the free oil of the spray-dried sample oxidised faster, probably due to the emulsion destabilisation observed, which gave rise to a great amount of oil on the particle surface as a consequence of large droplets poorly stabilised.     

Oil Demand and Stocks

Current data of world oil demand. This includes international bunkers and refinery fuel. Updated on a monthly basis. Current data of oil demand from counties such as Canada, the United States of America, Japan, OECD Europe, Belgium, France, Germany, Italy, Netherlands, Spain, Sweden, the United Kingdom, Australia, Mexico, Republic of Korea, and Turkey. Updated on a monthly basis. Current data for crude oil and refined product stocks in Canada, Chile, Mexico, the United States (Western Hemisphere), France, Germany, Italy, Netherlands, Spain, the United Kingdom and Other Europe (Europe), Japan, Republic of Korea, Other Pacific (Asia-Pacific), and Total OECD (Table 12.1) Current data for refined product stocks in the OECD Western Hemisphere, OECD Europe, OECD Asia-Pacific and Total OECD. Products include gasoline, diesel and gasoil, and heavy fuel oil. Updated on a monthly basis (Table 12.2).     

Combined effect of antimicrobial edible coatings with reduction of initial microbial load on the shelf-life of fresh hake (Merluccius merluccius) medallions

Two distinct strategies were combined to preserve fresh fish (Merluccius merluccius) under refrigeration at 4 °C for 12 days: (i) the application of an antimicrobial edible coating enriched with oregano essential oil (OEO) or carvacrol (CV) and (ii) the reduction of initial microbial load by good handling practise and the use of sodium hypochlorite (NaOCl). The action of antimicrobial coatings alone retarded the growth of Enterobacteriaceae, lactic acid bacteria (LAB) and H₂S producing bacteria on fish samples. The reduction of initial microbial load by itself only affected the evolution of LAB, but not the rest of the bacterial groups. When using both techniques combined, edible antimicrobial coatings were significantly more effective with additional and significant delays in the growth of mesophilic, psychrotrophic and Pseudomonas bacteria. Thus, the use of both strategies combined resulted in a reduction of the counts of all bacterial groups after 12 days of storage which ranged from 1.5 log and 8 log, in Pseudomonas and H₂S producing bacteria, respectively. Moreover, no significant differences were observed when comparing the microbiological evolution of samples treated with OEO compared to those only treated with CV.     

Structural/texture evolution of CaO/MCM‐41 nanocatalyst by doping various amounts of cerium for active and stable catalyst: Biodiesel production from waste vegetable cooking oil

In present work, the aim of producing biodiesel from waste cooking oil was pursued by doping the cerium element into the MCM‐41 framework as catalyst with various Si/Ce molar ratio (5, 10, 25, 50, and Ce = 0). The catalytic performance and stability improved by employing the ultrasound irradiation in active phase loading step of catalyst preparation. The physicochemical characteristics of synthesized samples were investigated using various techniques as follows: Brunauer‐Emmett‐Teller (BET), X‐ray powder diffraction (XRD), Fourier transfer infrared (FTIR), energy‐dispersive X‐ray spectroscopy (EDX), transmission electron microscopy (TEM), and field emission scanning electron microscope (FESEM). The XRD patterns along with the results of FTIR and BET analysis revealed the MCM‐41 framework destruction while increasing the Ce content. The FESEM images of the nanocatalysts illustrated a well distribution and uniform morphology for the Ca/CeM (Si/Ce = 25). The particle size and size distribution of the Ca/CeM (Si/Ce = 25) were subsequently determined by TEM and FESEM images. The activity of fabricated nanocatalysts was evaluated by measuring the free acid methyl ester (FAME) content of produced biodiesel. The tests were carried out at constant operational conditions: T = 60°C, catalyst loading = 5 wt%, methanol/oil molar ratio = 9, and 6‐hour reaction time. A superior activity was observed for Ca/CeM (Si/Ce = 25) among other nanocatalysts with 96.8% conversion of triglycerides to biodiesel. The mentioned sample was utilized in five reaction cycles, and at the end of the fifth cycle, the conversion reached to 91.5% which demonstrated its significant stability.     

Describing a strategy to estimate the CO2-heavy oil minimum miscibility pressure based on the experimental methods

To measure MMP, slim tube method is time consuming, especially for heavy oils. In this study, a strategy is considered to measure the MMP in one of the Iranian heavy oil reservoirs. The strategy steps were done through; partial data of slim tube, coupling numerical model (CNM), full slim tube, and VIT test. The results showed that CNM technique with two experimental data obtains the MMP value faster than running a full slim tube with low error result. However, VIT determined MMP faster and its results illustrated that miscibility pressure for heavy oil occurs at zero IFT, unlike light oils.     

An analysis of used lubricant recycling unit in Turkey

In chemical industries such as lube oil recycling units, stakeholders seek to continuously increase the productivity and profitability of the chemical processes to survive in the market. While scholars have investigated technological production options, recycling, and lube oil recycling flows, there is not enough study that evaluates the interplay between the production volume allocation and the recycled oil quality and quantity contingent upon the process temperature and pressure. The results based on a case study in the Kayalar Dorse production in Turkey show that by optimizing the chemical process mix, the volume of the lubricant oil can be increased by 20% at almost zero variable cost increase.